 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE 156.00 MHz Bandpass Filter 9.4 MHz bandwidth Part Number SF0156BA02421S -10 -20 -30 -40 -50 -60 131 156 181 Horizontal: 5 MHz/div Vertical (from top): Magnitude 10 dB/div -1 -2 -3 -4 -5 -6 148.5 156.0 163.5 Horizontal: 1.5 MHz/div Vertical (from top): Magnitude Group Delay Deviation 1 150 dB/div ns/div Rev X4 25-Jan-04 Page 1 of 3 Integrated Circuit Systems * Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA * Phone 508-852-5400 * Fax 508-852-8456 www.icst.com QF12/3 Integrated Circuit Systems, Inc. 156.00 MHz Bandpass Filter 9.4 MHz bandwidth Part Number SF0156BA02421S -10 -20 -30 -40 -50 -60 56 306 556 Horizontal: 50 MHz/div Vertical (from top): Magnitude 10 dB/div SPECIFICATION Parameter Center Frequency (Fc) 1 Minimum Insertion Loss 2 1 dB Bandwidth Amplitude Variation (151.3 to 160.7 MHz) Group Delay Ripple (151.3 to 160.7 MHz) Relative Attenuation at 141.0 MHz Relative Attenuation at 149.7 MHz Relative Attenuation at 162.3 MHz Relative Attenuation at 171.0 MHz Ultimate Rejection Source and Load Impedance Input Power Operating Temperature Range Notes: 1. 2. 3. Min Typ 156.00 20.6 Max 22.0 1.0 150 9.40 45 40 40 45 50 50 +10 23 -10 65 Units MHz dB MHz dB p-p ns p-p dB dB dB dB dB dBm C Average of the lower and upper 3 dB band edge frequencies. All dB values are referenced to the insertion loss. Specifications are valid for a temperature of 23C. Rev X4 25-Jan-04 Page 2 of 3 Integrated Circuit Systems * Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA * Phone 508-852-5400 * Fax 508-852-8456 www.icst.com QF12/3 Integrated Circuit Systems, Inc. PACKAGE OUTLINE 156.00 MHz Bandpass Filter 9.4 MHz bandwidth Part Number SF0156BA02421S Units: mm Pin Configuration: Input: 11 Output: 5 Ground: 1,2,3,4,6,7,8,9,10,12 MATCHING CIRCUIT Typical component values: (Minimum inductor Q = 40) Ls1 = 33 nH Ls2 = 33 nH Lp1 = 15 nH Lp2 = 22 nH Notes * Maximum 2% tolerance matching components shall be used. * Tuning values shown are for reference only. Optimum values may change depending upon board layout. ISO 9001 Registered Rev X4 25-Jan-04 Page 3 of 3 Integrated Circuit Systems * Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA * Phone 508-852-5400 * Fax 508-852-8456 www.icst.com QF12/3 |
Price & Availability of SF0156BA02421S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |